Catalogue

Air pipe heads are widely used on any watercraft. They are mounted on oil and fuel tank air pipes.

Air pipe heads suit all working drawings requirements plus RMRS 240712.001TU (23.01.2019) and RRR 240712.001TU (02.04.2014).

Spherical mushroom vents are used in marine passive ventilation and air conditionшng systems. There are two types of them: with upper and lower valve handle.

Cylindrical mushroom vents are used in marine passive ventilation systems.

Watertight vent heads are used in ship's and other watercraft's passive ventilation systems.

Airtight and watertight vent hatches are made according to working drawings and OST 5.5250, RMRS 240712.003TU (23.01.2019) and RRR 240712.001TU (02.04.2014) requirements.

Deck mounted filler necks are used on ships and other watercraft. They are designed for intake or output of oil, fuel, fresh or sea water, etc.

Actuators are produced according to requirements of OST 5.5316, RMRS 240712.002TU (23.01.2019) and working drawings.

Mud boxes are coarse filters for outboard water (both fresh and sea waters), oil and fuel.

Deck scuppers are manufactured according to design drawings 595-03.103…186, working drawings and TU OST 5.5432 requirements.

Our pipe sight glasses are produced in accordance to OST 5.5477 standard. Their purpose is control over the liquids flow in the pipelines.

Bulkhead penetrations are produced according to OST 5.5434 requirements. Working drawings have all necessary approvals.

Every valve is checked for reliable operation and is tested with a pressure of 3 bars (0.3 kg/cm2).

Pump out deck fittings are used to connect pumpout stations to dump waste water and other liquid waste

Pipe funnels are butt welded to a pipe. They are produced according to 594-03.143 drawings and they fit TU OST 5.5051 requirements.

Bilge pipe strainers cover the pipe's end or the intake valve.

Scupper lids are used to shut scuppers during the storm or under any other circumstances it is required.

Bushings and their parts (nuts, inserts, mounts, washers, caps) are designed to secure the cable pass through.

Various mounting accessories for cables, wires and other equipment.

Wing nuts according to GOST 17590 of bronze and brass.

Swing bolts of brass and bronze according to GOST 3033 (DIN 444).

Vent goosneck pipes according to drawings 1.561-132...136.

We produce various valve actuator parts based on drawings provided by a customer.

Round access hatch VGN-500, drawing #1-394-174, 500 mm inner diameter.

Pump out deck fitting adapters for waste water hose according to drawings 5.558-252.

Pipe connection fittings according to GOST 5890 standard.

Welding threaded fittings attachable to flat surfaces.

Vent mesh screens and gaskets according to OST 5.5043.

These products are manufactured according to OST 5.5176 and RMRS 240712.05TU.

Vent knife gate valves are designed according to OST 5.5221 requirements.

Airtight and watertight storm valves for ventilation and air conditioning systems.

Ventilation accessories: reducers, lids, filters, droplet separators, etc.

Vent bulkhead penetrations (round and rectangular).

Rectasngular and round vent flanges.

Pipe flanges of steel and brass.

Pipe weld ons of steel, stainless steel, bronze, brass.

Galvanic corrosion flange insulation kits for corroding flange materials combinations.

Marine fan unit mounting frames made of steel.

Vent and air conditioning mufflers.

Foldable sounding rods of steel, brass, red brass.

Socket wrenches for filler necks and other equipment.

Designed for passive ventilation of compartments supplied by air through decks or bulkheads. 

Puddle flanges for concrete ship hulls.

Water inlet grilles are made accordung to TU OST5.5095.

Drain plugs, cover nuts.